This is the jumbo version of my standard minifigure shelves.  It has seven levels and is nearly two feet wide by two feet tall.  This is the perfect display shelf for the minifigure collector who already has a massive collection and is in desperate need to get those guys up and off the floor or out of a random container so they can actually be seen. The seven levels embedded with 1x plates give you enough room to display up to 140 standard size minifigures.  Hanging the unit is easy using the two keyhole slots in the back that allow the shelf unit to sit flush against the wall.  
 
The shelves are handcrafted from solid premium-grade clear pine and will be sanded smooth and finished with your choice of stain and clear coat on all exposed sides to enhance the beauty of the wood and make it smooth to the touch.  (*The back side facing the wall is not finished.)  
 
Stain choices are:
 
•        Clear
•        Golden Oak
•        Slate Gray
•        Dark Walnut
•        Red Mahogany
 
The display shelf shown in the pictures is stained in “Dark Walnut.”  See the last picture to see examples of all the different stain choices applied to pine.  You can also choose from a large variety of different plate colors.  The plate color used in the listing pictures is traditional green.
 
Shelf dimensions are as follows:
 
•        Total Height: approximately 22”
•        Total Width: approximately 21 5/8”
•        Total Depth: approximately 1 ½”
•        Shelf Dimensions: approximately 20 1/8” wide x 1 ½” deep with 1x plate set ¼” back from front edge, each shelf section is approximately 2 1/4” tall
•        Block Plates: 1x64 studs for each level
 
Listing is for the shelf and includes the embedded plates unless you choose the “no plates” variation – props and minifigures used in the listing pictures are not included.  The “no plates” option will still have the grooves in each shelf so that you can fill them with your choice of plate colors.  I source my plates from other sellers on Etsy or other collectors and most of them have been slightly used, but I will not use any plates that are dirty or have obvious damage.  Some plates may have minor scratches or blemishes.  I have a large variety of plate colors that I try to keep on hand.  Please message me if you are looking for a specific color and you don’t see it in the drop-down list.  Plates are embedded into the shelf grooves using hot glue.  They can be pried out if necessary, but you should consider them permanent as they will be difficult to remove without damaging the shelves.
 
LEGO® is a trademark of the LEGO Group of Companies which does not sponsor, authorize, or endorse this product.